Visit Us

 

Technical Plant Tour (Equipment · Functions · Process · QA/QC · Product Mapping


Main Route: Raw Materials → Ironmaking → Steelmaking & Secondary Metallurgy → Continuous Casting → Hot Rolling → Cold Processing & Finishing → Surface Engineering & Corrosion Protection → Quality & Certification → Packing & Shipment  
NEW Stainless Branch: Laterite Nickel Ore → RKEF (Rotary Kiln–Electric Furnace) Ferronickel (NPI) → Hot-charged AOD (+ Ferrochrome) → Refining (VOD/VD as needed) → LF → Casting → same downstream as main line.    

0. Entry & Overall Flow  
• Equipment: Gantry cranes, stacker-reclaimers, enclosed conveyors, on-line sampling & lab, utilities (steam/GOX/GN₂/GAr/natural gas, gas holders).  
• Function: Receiving, classification, automated batching; utilities scheduling with interlocks.  
• Process: “Ore–Coke–Flux–Scrap/Alloys–Energy” closed loop from receiving to batching.  
• QA/QC: Chemistry (OES/ICP), size & moisture, sinter strength, coke CRI/CSR; batch retention policy.  
• Product mapping: Sets baseline for cleanliness & weldability and MTC (EN 10204 3.1/3.2) traceability.    

1. Raw Materials & Preparation  
• Equipment: Stockyards, blending stations, sinter plant or pellet shaft kiln/rotary kiln, CDQ, lime kiln, annular cooler, dedusting & DeSOx/DeNOx.  
• Function: Blending, agglomeration, coking, lime calcination.  
• Process:  
• Iron ores: Zoning by TFe/SiO₂/Al₂O₃/P/S, PSD, return fines ratio; produce stable sinter/pellets.  
• Coking: Coal blending → coking → CDQ heat recovery; by-products utilization.  
• Fluxes: Control basicity, size and lime activity.  
• For stainless: Laterite nickel ore drying & pre-reduction prior to RKEF; control moisture, Ni grade and gangue.  
• QA/QC: Sieve analysis, tumble & hot/cold strength, continuous emissions monitor.  
• Product mapping: Stable burden for BF/EAF and feed for the RKEF-AOD route.    

2. Ironmaking (BF or Direct Reduction)  
• Equipment: BF, bell-less top, hot blast stoves, PCI, cast house; or DRI shaft/HBI unit.  
• Function: Produce hot metal or DRI as metallic feed.  
• Process: BF with O₂ enrichment & PCI; DRI/HBI with NG/H₂ reducing gas.  
• QA/QC: Hot metal chemistry & temperature, slag basicity; TRT & gas safety interlocks.  
• Product mapping: Carbon/low-alloy feed; EAF+DRI route for stainless is optional.    

3A. Steelmaking & Secondary Metallurgy (Main)  
• Equipment: BOF, EAF, LF, VD/RH/VOD, argon stirring, on-line sampling/pyrometry.  
• Function: Decarburization/dephosphorization/desulfurization, alloying, inclusion control, degassing.  
• Process: BOF top-bottom blowing; EAF foamy-slag melting; LF trimming and inclusion modification; VD/RH for H/N/O removal.  
• QA/QC: Spectrometry, H/N, inclusion rating (ASTM E45/ISO 4967), temperature hit rate; fume/noise/EM protection.  
• Product mapping: Carbon, low-alloy, structural, pressure vessel, ship/bridge plates.    

3B. Stainless NPI-AOD Branch (NEW)  
• Route: Laterite Ni ore → RKEF ferronickel (NPI) → hot-charged AOD (+ FeCr) → VOD/VD (as needed) → LF → Casting → downstream same as main line.  
• Equipment: Rotary kiln & electric furnace (RKEF) or rotary furnace + EAF; NPI launder & insulated ladle; AOD converter with O₂-Ar (or O₂-N₂) blowing; alloy addition (FeCr etc.); vacuum station; LF.  
• Functions:  
1. RKEF: Pre-reduction and smelting to NPI; control Ni/Fe/Si/S/P and tapping temperature.  
2. AOD: Deep decarburization with minimal Cr loss via O₂-Ar ratio & lance control; FeCr addition to target Cr window; nitrogen control for austenitic/duplex grades.  
3. Refining + LF: VOD/VD for degassing (H/N/O); LF for homogenization and inclusion modification to hit final composition.  
• Key controls: O₂/Ar ratio & lance position; AOD slag (CaO-SiO₂-MgO) and [Cr]–[C] equilibrium; N control by N₂ participation or late alloying; Al/Si deoxidation and Ca treatment.  
• QA/QC: NPI chemistry; AOD pre/post spectrometry, O/N/H; inclusion rating (ISO 4967); A923 (duplex), G48 pitting, A262 IGC where applicable; process curves (gas flows, time, slag, temperature).  
• Product mapping: Austenitic (304/316/321/347H/310S/904L), Duplex (2205/2507), Ferritic & Martensitic stainless families.    

4. Continuous Casting  
• Equipment: Tundish, mold, secondary cooling, segments, straightener, flying shear, on-line surface inspection/grinding; EMS & soft-reduction.  
• QA/QC: Mold level, flux properties, spray curve; macro-etch (ASTM E381), UT per contract (ref. EN 10160 logic).  
• Product mapping: Thin slab 50–110 mm, conventional 150–250 mm, extra-thick 450–600 mm; billet/bloom for bars/sections/forged-rolled.    

5. Hot Rolling  
5.1 Coils (HSM)  
• Equipment: Reheating furnace, descaling, rougher/finisher, laminar cooling, coiler.  
• QA/QC: Temperature & cooling curves, AGC/AFC, on-line surface.  
• Products: HRC, pickled coils, hot strip; stainless hot coils/strip.    
5.2 Plate Mill  
• Equipment: Reheating, 4-high/duo reversing mill, ACC, leveller, UT.  
• QA/QC: TMCP, thickness/flatness, lamellar tearing sensitivity.    
5.3 Longs (Sections/Bars/Wire Rod)  
• QA/QC: Geometry, controlled cooling, surface, coil density & scatter of tensile properties.    
5.4 Pipes & Tubes  
• Process: Seamless (piercing–rolling–sizing–HT–NDT–hydro/airtight) and welded (ERW/HFW, UOE/LSAW, SSAW/SAW).  
• Dimensions: ASME B36.10/36.19, ISO 1127.    

6. Cold Processing & Finishing  
• Equipment: Pickling, 4/6/20-high cold mills, continuous/batch annealing, skin-pass, tension levelling, slitting & cut-to-length.  
• Stainless: Pickling & passivation (ASTM A380/A967), BA bright anneal, EP electropolish.  
• Tubes: Cold draw/pilger, stress relief, straightening; ID/OD surface class inspection.  
• QA/QC: Dimensional tolerances (ISO 1127/EN 10305), laser measurement & SPC.    

7. Surface Engineering & Corrosion Protection  
• Pretreatment: Sa 2½ blasting; avoid free-iron contamination on stainless.  
• Paint systems (ISO 12944): Zn-rich epoxy + high-solids epoxy + PU; multilayer or weatherable top for C5/CX.  
• Metallic coatings: HDG (ISO 1461), thermal spray Zn/Al (ISO 2063), electro-zinc & phosphate/Dacromet.  
• Pipeline: FBE (AWWA C213/CSA Z245.20), 3LPE/3LPP (ISO 21809-1); linings AWWA C205/C210/C222/C214/C215; rubber/PTFE/PFA/glass-flake by medium/temperature.  
• Stainless surfaces: A380/A967 passivation, EP, ferroxyl test.  
• Inspection: DFT, adhesion, impact/bend, holiday (AMPP/NACE SP0188), salt-spray & chemical resistance.    

8. Quality & Certification (ITP)  
• Chemistry: OES/ICP, C/S combustion, O/N/H fusion.  
• Metallography & Corrosion: Inclusion rating, A923 (duplex), G48 pitting, A262 IGC.  
• Mechanical: Tensile, CVN impact, hardness, creep & rupture (on demand).  
• Geometry: Laser thickness/flatness, straightness/ovality/eccentricity for tubes.  
• NDT: UT/RT/MT/PT/ET per standards & contract.  
• Pressure & Tightness: Hydro/air/helium (clean/cryogenic).  
• Docs & Traceability: EN 10204 3.1/3.2, heat-treat curves, NDT/pressure/coating QC, barcode/RFID end-to-end.    

9. Digitalization & Process Control  
• Level-1/2 models, MES, quality data lake & SPC; IR/thermal imaging, shape control, energy/vibration, PdM; KPI loop across raw-steel-cast-roll-finish-ship.    

10. EHS  
• Gas & hot-work interlocks, CO/CO₂/O₂ monitoring, thermal protection, LOTO; lifting & securing rules; dedusting, wastewater reuse, slag/fines recycling; TRT/CDQ; carbon management (BF-BOF vs EAF, CCUS/H₂ trends).    

11. Logistics & Packing  
• Forms: coils, plates, sections, bars/rod, straight/coil tubes.  
• Packing: end caps, edge protectors, steel straps, anti-slip pads, VCI, wrap, wooden/steel pallets.  
• Shipping: sea/rail/road; tropical moisture protection; full document set (packing/weight list, CoO, inspection).    

12. Typical Standards Mapping (Examples)  
• Stainless plates/coils: ASTM A240, EN 10088-2, GB/T 3280.  
• Tubes: A312/A213/A269/A789; Ni-alloys B444/B423/B167/B622; sizes ASME B36.10/36.19 or ISO 1127.  
• Structural/sections: ASTM A36/A572, EN 10025.  
• Pipeline & OCTG: API 5L, API 5CT, NACE MR0175/ISO 15156.  
• Water & coatings: AWWA C200/C205/C210/C213/C214/C215/C222; AMPP/NACE SP0188.    

13. Sample “Tour-to-Delivery” Card  
1. Slab incoming (MTC 3.1 with E381/UT) →  
2. Hot rolling (AGC/AFC logs; on-line surface map) →  
3. Pickling + cold rolling + anneal (heat/curve) →  
4. Final inspection (chem/mech/dim/surface) →  
5. Corrosion protection or passivation/BA/EP (DFT & holiday) →  
6. Packing & ID (barcode/RFID) →  
7. MTC 3.2 (if required) →  
8. Shipment.    

14. Tour Tips (Tech + Commercial)  
• Tech: temp-chem-microstructure-defect loop; EMS+soft-reduction for center quality; stainless AOD/VOD & surface passivation.  
• Commercial: standards & revisions, NDT coverage & rejection rules, traceability depth, coating/lining systems, packing & delivered quality, cross-family consolidation capability.  

This is Title One h1 Placeholder Text

Tsisco Industrial Ltd.